News
News Center
Adjustment method of thread rolling plate clearance of thread rolling machine
Release time:
2024-05-20
The Function and Influence of 1. the Clearance of Wash Plate
The clearance of the washboard of the thread rolling machine refers to the distance between the upper and lower plates of the washboard, which will affect the thickness, uniformity and quality of the thread rolling. If the gap is too large, it will lead to uneven rolling, insufficient force, and unqualified finished products; if the gap is too small, it will lead to poor rolling and easy damage to the machine.
Adjustment Method of Clearance of 2. Wire Plate
1. First of all, you need to adjust the gap on both sides, adjust the right side first, and adjust the left side later. You can use a wrench to adjust the movable shaft on the right so that the gap on the right becomes the tenth of a centimeter you want, and then move the washboard to the right. After moving to the right side, take the tripod to measure whether the distance between the right side of the washboard and the table top is equal, so as to ensure that the washboard is stably placed on the table top. Then, take another wrench to adjust the movable shaft on the left side to make the gap on the left side one tenth of a centimeter as you want, then move the washboard to the left side and measure whether the distance between the left side of the washboard and the table top is equal to ensure that the washboard is placed on the table top horizontally and stably.
2. Secondly, it is necessary to adjust the four compression nuts of the closing cover to determine the gap of the whole washboard. The gap of the closing cover has a great influence on the quality of the rolling wire. Therefore, we need to adjust the gap between the upper right corner, top, upper left corner, middle part, lower right corner, bottom and lower left corner of the washboard after closing the cover to the size you need (about 0.2-0.4mm).
3. considerations
1. Before each replacement of different specifications of the silk head, it is necessary to re-adjust the clearance of the washboard to ensure that the quality of the rubbed silk meets the requirements.
2. Before adjusting the washboard gap, you need to turn off the power and unplug the plug to avoid safety accidents.
3. During the adjustment process, attention should be paid to the fact that movable shafts, wrenches, screws and other tools should be kept clean and tidy, so as not to cause inaccurate adjustment of the clearance of the rubbing plate and affect the quality of the rubbing.
4. epilogue
The adjustment of the clearance of the washboard of the thread rolling machine plays a vital role in the quality of the thread rolling. Only reasonable adjustment can ensure the stability and efficient production of the quality of the rolling wire. It is hoped that this article can be helpful to the method of adjusting the clearance of the washboard.
Previous Page
Previous Page
Latest News
2025-06-07
Get a Free Consultancy
Tengma Standard Parts and Tools Co., Ltd.
Tengma tools specializing in the production of various specifications of the washboard, rolling wheel, and according to customer demand for a variety of standard customization.
202 Zhencheng Road, Jiangyin City, Jiangsu Province
Quick links
Copyright©2024 All Rights Reserved of Tengma Standard Parts and Tools Co., Ltd